Spakfilla Wall Repair Kit
Features
- All-in-one kit (patch, filler, spatula, sanding block)
- Can repair holes/cracks up to ~8 cm wide
- Uses Spakfilla Rapid included in kit
- Enables large repair with reinforcement via patch
Important Information
- Best used for interior walls (ceiling, plasterboard etc.)
- Patch needed for holes > 25 mm wide
- Surfaces must be clean and dry
Downloads
- Technical Details
- Limitations
- Directions For Use
Kit contents |
Self-adhesive wall patch Spatula Sand Block Filler Tub (100g) |
Dry time |
30 minutes for thin applications; longer for deeper or cold/humid conditions |
- Not recommended on plastic, metal or exterior timber surfaces prone to moisture changes
- Avoid use in very cold / wet weather
- Not structural or load bearing
- Sand rough edges; wipe surface clean.
- Apply patch over hole with minimum overlap.
- Use spatula to cover patch generously, extending past edges.
- Once dry, sand smooth and wipe away dust.
- Paint over if required.
Product Range
Spakfilla Rapid
- Fast-drying (paintable in 30 minutes in thin applications)
- Lightweight, ready-mixed filler
- Virtually non-shrinking, non-cracking
Spakfilla Heavy Duty
- Tough, durable ready‑mixed filler
- Interior & exterior use
- Easy to sand
Spakfilla Colour Smart
- ColourSmart indicator: goes on pink, dries off-white
- Ready-mixed formula (no mixing required)
- Minimal shrinkage; single application for many fills
Spakfilla Wall Repair Kit
- All-in-one kit (patch, filler, spatula, sanding block)
- Can repair holes/cracks up to ~8 cm wide
- Uses Spakfilla Rapid included in kit
Share
Share this Product with your friends