Spakfilla Rapid
Features
- Fast-drying (paintable in 30 minutes in thin applications)
- Lightweight, ready-mixed filler
- Virtually non-shrinking, non-cracking
- Easy to sand
- Suitable for interior & exterior
Important Information
- Use for filling wallboard, wood, masonry, plasterboard, nail heads
- Works best on clean, dry surfaces free from loose material
- Expect slower drying in thick applications or in cold or humid environments
Downloads
- Technical Details
- Limitations
- Directions For Use
Technology |
Water-based filler |
Appearance |
Smooth white paste |
Dry / Paint time |
<2 mm depth → 30 min >2 mm depth → up to 24 hrs |
Packaging sizes |
180g / 400mL Tub 260g / 600mL Tub |
- Not suitable for use on plastic, metal, or exterior timber that may swell/shrink with moisture
- Avoid use below ~ 5 °C or in wet conditions
- Not load bearing; avoid where compression or movement occurs
- Prepare surface: clean, dry, sand lightly if needed.
- Using spatula, press filler firmly into hole/crack; smooth off.
- Do not overfill: minimal shrinkage.
- Once set (30 min for thin fills), lightly sand for smooth finish.
- After sanding, paint with water-based paints; for oil-based, wait ~24 hrs.
Product Range
Spakfilla Rapid
- Fast-drying (paintable in 30 minutes in thin applications)
- Lightweight, ready-mixed filler
- Virtually non-shrinking, non-cracking
Spakfilla Heavy Duty
- Tough, durable ready‑mixed filler
- Interior & exterior use
- Easy to sand
Spakfilla Colour Smart
- ColourSmart indicator: goes on pink, dries off-white
- Ready-mixed formula (no mixing required)
- Minimal shrinkage; single application for many fills
Spakfilla Wall Repair Kit
- All-in-one kit (patch, filler, spatula, sanding block)
- Can repair holes/cracks up to ~8 cm wide
- Uses Spakfilla Rapid included in kit
Share
Share this Product with your friends