Spakfilla Colour Smart
Features
- Colour Smart indicator: goes on pink, dries off-white
- Ready-mixed formula (no mixing required)
- Minimal shrinkage; single application for many fills
- Fast drying; sanding & painting soon after
Important Information
- Suitable for plaster, plasterboard, masonry, wallboard, primed nail heads
- Interior use and exterior when painted
- Surfaces must be clean, dry, free of protrusions or loose material
Downloads
- Technical Details
- Limitations
- Directions For Use
Dry time for 2 mm fill |
~2 hours |
Packaging sizes |
180g / 400mL Tub |
Clean-up |
Water before fully dry |
- Not recommended on plastics, metal, or exterior timber likely to swell/shrink
- Avoid using in wet conditions or below ~5 °C
- Not for load bearing applications or where surfaces will undergo structural movement
- Press filler firmly into hole/crack with included spatula; smooth off.
- Do not overfill due to minimal shrinkage.
- Wait until filler turns off-white (colour change) before sanding.
- Clean off dust, then paint with water- or oil-based paint (allow longer drying time for oil-based).
Product Range
Spakfilla Rapid
- Fast-drying (paintable in 30 minutes in thin applications)
- Lightweight, ready-mixed filler
- Virtually non-shrinking, non-cracking
Spakfilla Heavy Duty
- Tough, durable ready‑mixed filler
- Interior & exterior use
- Easy to sand
Spakfilla Colour Smart
- ColourSmart indicator: goes on pink, dries off-white
- Ready-mixed formula (no mixing required)
- Minimal shrinkage; single application for many fills
Spakfilla Wall Repair Kit
- All-in-one kit (patch, filler, spatula, sanding block)
- Can repair holes/cracks up to ~8 cm wide
- Uses Spakfilla Rapid included in kit
Share
Share this Product with your friends