Selleys No More Cracks Wood Filler

1. Ensure the surface to be filled is clean and dry with no loose or powdery material.
2. Use a filling blade or scraper to firmly press the filler in and scrape off excess, this will minimise sanding.
3. Allow to dry for 2-3 hours, depending on humidity and then sand back with fine sand paper.
4. For a perfect finish apply another thin coat of filler, allow to dry before sanding lightly with very fine sand paper. For best results apply an undercoat before your top coat.

        Limitations:

• Where movement occurs, use Selleys No More Gaps.
• For interior use only.

• For a perfect finish and to minimise sanding, slightly overfill and sand back with fine (>200 grit) sandpaper upon drying, then apply a final thin coat of filler and allow to dry before sanding lightly with very fine (>400 grit) sandpaper.
• When tinting or staining, note that the final colour is not achieved until varnish is applied.
• Start off with light application of stain as the tone can then be progressively darkened by applying more stain to obtain the desired tone – if possible work first on a inconspicuous area or an off-cut, to determine amount of staining required for a perfect colour-match.
• For best results if painting, apply an undercoat before your top coat.

• Uncured product may be removed with water.
• Cured product can be removed by sanding and scraping.