Knead It Steel
Get a strong and durable solution with Selleys Knead It Steel from our putty range. A fast setting, non-rusting co-extruded epoxy repair system that can be used for metal items.
Knead It Aqua
Key Features
- Versatile hand kneadable, fast setting, co-extruded epoxy glue
- Especially designed for application to damp, wet or underwater areas
- Will not sag, run or drip
- Can be drilled, sawed, sanded, filed, tapped, machined or painted 1 hour after mixing
- Heat resistant to 120°C continuously or 140°C intermittently
- Can be used under fresh or salt water
- Set time - less than 20 min
- Suitable for contact with drinking water
Knead It Multipurpose
Discover the versatility and durability of Selleys Knead It Multipurpose from our putty range. Perfect for all your DIY projects and repairs, making sure they last for years to come.
Selleys Araldite Super Strong Epoxy Adhesive
For the most heavy-duty repairs, this product provides a super strong bond and a 5-minute set time. Araldite Super Strong Epoxy Adhesive is designed for load bearing repairs, broken furniture, woodworking or concrete repair with a crystal-clear finish.
- Overview
- Instructions
- Specifications
Selleys Knead It Aqua is a versatile hand kneadable, fast setting co-extruded epoxy repair system that can be used for repairing a multitude of things. It is especially suitable for application to damp, wet or underwater substrates.
Where can this product be used?
- Creating water features/ attaching pebbles under water in a pond
- Sealing holes in foundations and outer walls
- Repairing generators, water and fuel pumps
- Re-setting ceramic tiles in swimming pools etc
- For fast and permanent repairs to damp and wet substrates, and even for underwater repairs
- Patching dings, scratches, cuts, gouges and holes in fibreglass, metal and wooden boat decks and hulls
- Repair of pipes, fittings, electrical connections, water tanks, tubs, sinks, spas, hot tubs, tanks, pools, leaking gaskets
- Forming custom gaskets etc
- Ideal for emergency in-water repairs
- Repairing fishtanks, ponds, pools
- Approval for Drinking Water Contact to AS/'NZ4020:2005, however limited to maximum surface area:volume ratio of 100 mm2/L atmaximum temperature of 85°C.
What materials is this product suitable for?
- Fibreglass
- Wood/Timber
- Ceramics
- Metal
- Concrete
- Glass
- Most plastics* (pre-test required)
- Masonry
How to Use
- Clean surface free of grease, dirt and dust. For best results roughen bond area prior to cleaning.
- Cut off required amount. Replace disc on remaining portion. Wear gloves to avoid messing hands. To mix, knead with fingers to uniform colour. If mixing is difficult, warm to room temperature.
- Apply to surface to be repaired (within 12 minutes of mixing) and work the material forcefully into the surface applying pressure until adhesion begins to take effect. Mould to shape if required. If material sticks to fingers, use the plastic wrapper to press the material in place.
- For a smooth appearance, remove excess and hand rub with water or a damp cloth before hardening begins.
- Trim away any excess before initial hardening. Remove any residues with acetone prior to initial hardening. Hardened excess may be sanded or trimmed away once fully cured.
- After 20-30 minutes Knead-It Aqua will harden and begin to form a strong bond. Allow for longer cure times at lower temperatures. After 60 minutes Knead-It Aqua may be drilled, sanded, machined, filed, sawed or painted.
- Wash hands thoroughly with soap and water after use.
Limitations:
- Not recommended for filling or sealing joints/cracks subject to movement as the cured product is extremely hard and inflexible.
- Does not adhere to polyethylene, polypropylene or Polytetrafluoroethylene (Teflon) or silicone rubber
- Not recommended for use where hydrostatic pressure is present prior to cure
Handy tips
- Ensure the putty and hardener are mixed properly. Knead It will become warm as it is mixed, A good indication its mixed properly is when you have a uniform colour, and feel a mild heat radiating from the Knead It.
- To help determine when your Knead It has set, keep a small piece off to check- when it is hard, it indicates your job is done.
- Use Knead It Steel for applications on metal or fuel contact
- Set time increases at temperatures below 20°C.
Clean Up
- Remove excess and hand rub with water or a damp cloth
before hardening begins.
Size |
50g Tube 110g Tube |
Colours |
Light grey |
Technology |
Epoxy |
Use |
Interior Exterior |
Share
Share this Product with your friends