Selleys Super Glue Single Shot 5x1mL Pack
Make your minor repair with less product waste when using Selleys Super glue Single Shot . This fast-drying formula sets in just 10 seconds, creating a strong and durable bond.
Selleys Super Glue Stand-up
Key Features
- Free standing tube prevents leaks and retracts partly dispensed glue
- No mess stand up tube
- Works on most surfaces*
- Non clog nozzle
- Extremely fast setting, sets in 10 seconds
- Water resistant
- *Not for polyethylene, polypropylene plastics or glass
Selleys Power Grip
Looking for a strong and flexible adhesive for all your minor repairs? Selleys Power Grip is the answer. This non-drip formula is perfect for vertical applications and works on a variety of materials.
Selleys Fix & Go Brush On
Get quick and easy repairs with Selleys Fix & Go Brush On Super Glue. This brush-on super glue is perfect for small repairs and sets in just 10 seconds.
- Overview
- Instructions
- Specifications
Selleys Super Glue Stand-up is great for all types of household repairs and leaves no mess on the benchtop. The stand up tube won't clog up since the product retracts back into the tube after use. It requires no mixing, gives a strong bond in seconds and dries clear.
Where can this product be used?
- Ideal for small repair jobs or when immediate results are required
- For interior projects and repairs
What materials is this product suitable for?
- Ceramic
- Metals
- China
- Paper
- Wood
- Most plastics*
- *Not suitable for bonding plastics such as Polypropylene and Polyethylene. Use Selleys All Plastics.
Please contact your store to confirm avalaibility, as some stores may have a limited range.
How to Use
-
- Ensure surfaces to be bonded are clean, dry, free of dust, and close fitting.
- Hold tube upright and without applying pressure, pierce seal at end of tube by attaching nozzle and cap and turning clockwise.
- Remove cap and apply a small amount of glue to one surface. Bring surfaces together and apply slight pressure. The product grabs within 10 seconds, depending on environmental conditions and materials to be bonded. Allow 30 minutes for sufficient bond strength for practical use.
- Wipe tip of tube, replace cap and store upright in a dry cool place.
Limitations:
- Water resistant not water proof, therefore not suitable for surfaces that will be continually wet.
- *Not suitable for bonding plastics such as Polypropylene and Polyethylene. Use Selleys All Plastic Fix.
- Not suitable for repairing items that are in direct contact with hot liquids eg saucepans.
- Will not permanently bond glass or materials containing alkaline elements.
- Has no gap filling properties therefore surfaces need to be a close fit.
- Not recommended for highly porous surfaces.
- Not recommended for glass. Use Selleys Araldite Ultra Clear.
Handy tips
- Super Glue can create a white residue on the surface of a material if the area is not well ventilated. Clean the affected area with acetone to remove residue. Take care to make sure of compatibility as acetone may damage sensitive materials.
- Excellent when used with other adhesives, as the temporary tack.
- After use, wipe excess product from the nozzle with a tissue dipped in acteone.
- In the event that fingers get stuck together, apply a solvent such as acetone to contact areas then wash off with water. Do not use solvents near eyes or open wounds.
- Since Super Glue cures with moisture set times may be extended on very dry surfaces or under dry conditions.
- Super glues cure more slowly when large amounts are used. For faster cure use sparingly.
- To remove excess from materials, it is recommended that the material be soaked in a solution of acetone and water (i.e. 3 parts acetone to 1 part water). Where soaking is not possible, try placing a piece of absorbent material (eg cotton wool) soaked in acetone on the excess for 5 to 10 minutes, topping up the acetone if it evaporates. Gently rub the surface with the material to remove the residues. Test the surface in an inconspicuous spot to ensure it is unaffected by acetone before attempting removal using this method.
- Do not squeeze tube before removing cap. Handle tube by plastic nozzle neck when opening and closing cap. This prevents pressurising tube which may force material into cap, preventing a tight seal after use.
- May cause some leather to discolour or harden – pre-test on an inconspicuous area.
Clean Up
- Clean Up
- Uncured product may be removed with acetone.
- Cured product can be sanded and scraped.
- If on clothes or fabric, soak overnight and once the glue is softened, rub to remove.
Size |
3mL Tube |
Colours |
Clear |
Technology |
Cyanoacrylate |
Use |
Interior |
|
Exterior |
Useful downloads
How to Guides
How To Create a Chopping Board
Make your own chopping board with Selleys. Our guide will show you how to create a custom board that's perfect for your kitchen.
How To Fix a Splashback to a Wall
Get your kitchen looking new again with Selleys. Our guide will show you how to fix your splashback to the wall quickly and easily.
How To Makeover Your Kitchen in an Afternoon
Transform your kitchen in just one afternoon with Selleys. Our guide will show you how to update your space with easy DIY projects.
How To Seal a Kitchen Splashback
Protect your kitchen from moisture and stains with Selleys. Our guide will show you how to seal your kitchen splashback quickly and easily.
Share
Share this Product with your friends