Selleys Ezi Press Wet Area Silicone
Selleys Wet Area Ezi Press is ready to use – simply press the lever to apply – no caulking gun required.
Selleys Wet Area Silicone Sealant is ideal for use in bathrooms, kitchens and laundries and delivers a superior waterproof and mould resistant seal that will not shrink, crack or peel away, guaranteed for 25 years
Features
- 100% silicone sealant
- 25 year guarantee* against crumbling, cracking or peeling away.
- Waterproof seal - Superior adhesion and resistance to lifting provides a long lasting, flexible seal
- Mould resistant - helps prevent growth of unsightly black mould and fungus.
- Available in a range of colours to suit most wet areas.
- Non corrosive neutral cure formula.
Where can this product be used?
- Showers screens
- Baths
- Spas
- Sinks
- Plumbing Fixtures
What materials is this product suitable for?
- Ceramic, glazed and porcelain fixtures
- Metal, copper and brass fittings
- Plastic laminates
- Rubber
- Glass
- Stainless steel
- Concrete and grouts
- Many plastics including polystyrene
Please contact your store to confirm avaliability, as some stores may have a limited range.
| Size |
300g cartridge |
|
75g Tube (White only) |
|
| Colours |
Clear |
|
White |
|
|
Ivory |
|
|
Off White |
|
|
Light Grey |
|
|
Dark Grey |
|
|
Black |
|
| Technology |
Neutral Cure Silicone |
| Use |
Interior |
Use in a well ventilated area. Avoid contact with skin and eyes.
- Clean surface with mineral turpentine and dry.
- Cut cartridge, fit and cut nozzle at 45° angle and fit into a caulking gun.
- Apply with steady pressure, ensuring sealant is pushed into joint.
- Tool with a spatula dipped in detergent water within 5-10 mins of application.
- Clean up with mineral turpentine before product skins.
- Sealant will cure in 72hrs.
Limitations:
- Not paintable. Complete painting 7 days prior to applying sealant.
- Not suitable for building materials that bleed oils or solvents, such as impregnated wood.
- Not for use on polyethylene, polypropylene or Teflon. Pre-test plastics before use.
- Not suitable for aquariums.
- Not suitable for food or drinking water contact.
- Not suitable for permanent water immersion.
- For neater joints, mask sides before applying sealant and remove tape before sealant skins.
- When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of silicone sealant.
- Work in sections that can be completed before sealant skins.
- Tooling off and tape removal must be completed before skinning occurs or a rough surface, may result so working in sections allows for a better finish.
Refer to product label for full conditions. This guarantee does not limit and may not necessarily exceed your rights under the Competition and Consumer Act 2010.
- Uncured product may be removed with mineral turps.
- Cured product can be removed with Selleys Silicone Remover or by
cutting and scraping.
Selleys FlameFlex
Selleys FlameFlex High Performance Sealant can be used for construction joints & gaps where a fire rated seal is specified*.
Selleys Glass Silicone
Selleys Glass Silicone is an acetic acid curing 100% silicone, which been specially formulated for glazing and aquarium construction.
How to Guides
How To Create A Chopping Board
Keep on trend and learn how to create a stunning chopping board for serving which will be the envy of your friends at your next dinner party.
How To Fix A Splashback To A Wall
Sticking a splash back in a kitchen is a great way to improve the aesthetics of the kitchen. Selleys make the job easier with this step by step guide.
How To Makeover Your Kitchen In An Afternoon
The kitchen is the heart of every family home, but over time – cooking spills, kids, clutter can leave it looking a little tired. Here are some simple steps to giving it a refresh
How To Seal A Kitchen Splashback
Sealing your splashback is the final step to installing a splashback and perhaps the most important! It's super easy to do with Selleys silicone sealant.
Share
Share this product with your friends