High Performance Sealants

Selleys FlameFlex

Selleys-Flameflex-Grey-Cartridge

Selleys FlameFlex is a fire and acoustic rated sealant with outstanding product performance.



Features

  • Fire rated up to 4 hours according to AS1530.4#
  • Complies with BCA acoustic requirements#
  • Superior UV resistance
  • Suitable for interior and exterior use
  • No primer required before painting
  • Adhesion to wet or damp surfaces
  • Better curing (>5°C)
  • Non-bubbling
  • Paintable with water-based paints after product skins in 60 to 90 minutes (apply paint within 12 hours of sealant application)
  • Low VOC – so can be used in any environment without discomfort

Available Sizes

  • 435g Cartridge

Colours

  • Grey

Available At

  • Bunnings
  • Mitre 10
  • ITM
  • Carters
  • Place Makers
  • BuildLink

Contact the store to confirm stock availability, as some stores may have a limited range.

#Fire tests conducted in joints up to 40mm wide. Refer to TDS and contact Selleys for more specific information on fire and acoustic rated installations.
^Meets GBCA limits for general purpose and architectural sealants.

Where can this product be used?

Perfect for use on and around:

  • Sky lights
  • Walls
  • Patios
  • Windows
  • Expanding joints in concrete

What materials is this product suitable for?

  • Concrete
  • Timber
  • Metals
  • Cement sheeting
  • Brick
  • Plasterboard
  • Ceramic tiles
  • Fibreglass
  • Most plastics (Pre-test before use. Not for polyethylene, polypropylene or Teflon.)

How to use this product

  • Ensure substrates are clean and free of oil, grease or loose particles.
  • Cut seal and nozzle and fit to cartridge, then place in caulking gun.
  • Hold caulking gun at 45 angle and gun sealnt ahead of nozzle ensuring product is pushed into joint.
  • For neat joints, use masking tape on both sides of the joint and remove before skinning.
  • Tool with a soapy solution before skinning occurs. For optimal joint design, use non-absorbent backing material (e.g. polyethylene backer rod) and appropriate joint width/depth. See technical data sheet for more information.

Storage and re-use

  • Product has a 12 months shelf life when stored unopened, in dry and cool conditions
  • Use within 6 months after opening

Clean up

  • Uncured sealant can be removed with Mineral Turpentine

Safety tips

  • Not suitable on polyethylene, polypropylene or Teflon.
  • Cure excess product before disposal.
  • Avoid skin and eye contact and inhalation of vapour. If in eyes, wash out immediately with water. If skin contact occurs, wipe off immediately and wash with running water.
  • Ensure use in a well ventilated area.
  • Additional information is provided in the Safety Data Sheet.
  • 24 Hour Emergency Response : AUS 1800 033 111 NZ 0800 734 607

Download your TDS here

#Fire tests conducted in joints up to 40mm wide. Refer to TDS and contact Selleys for more specific information on fire and acoustic rated installations.
^Meets GBCA limits for general purpose and architectural sealants.