Selleys ColourFlex
Selleys ColourFlex provides a durable, mould resistant and non-substrate staining seal that will look better for longer compared to conventional sealants.
Features
- No substrate staining
- Mould resistant
- Long lasting flexibility
- Water tight seal with a 10 year guarantee (see pack for details)
- Adhesion to wet or damp surfaces
- Better curing (>5°C)
- Non-bubbling
- Better extrudability (>5°C) with no slump
- Paintable with water-based paints after product skins in 60 to 90 minutes
- Low VOC – so can be used in any environment without discomfort
Available Sizes
- 300g Cartridge
- 445g Cartridge
Colours
- 300g Cartridge – Clear
- 445g Cartridge – Grey, White and Black
Available at
- Bunnings
- Mitre 10
- ITM
- Carters
- Place Makers
- BuildLink
Contact the store to confirm stock availability, as some stores may have a limited range.
Where can this product be used?
Perfect for use on and around:
- Sky lights
- Walls
- Patios
- Floors
- Fencing
- Windows
- External wall panels
- Expanding joints in concrete
What materials is this product suitable for?
- Concrete
- Timber
- Metals
- Cement sheeting
- Brick
- Plasterboard
- Ceramic tiles
- Fibreglass
- Most plastics (Pre-test before use. Not for polyethylene, polypropylene or Teflon.)
How to use this product
- Ensure substrates are clean and free of oil, grease or loose particles.
- Cut seal and nozzle and fit to cartridge, then place in caulking gun.
- Hold caulking gun at 45° angle and gun sealnt ahead of nozzle ensuring product is pushed into joint.
- For neat joints, use masking tape on both sides of the joint and remove before skinning.
- Tool with a soapy solution before skinning occurs. For optimal joint design, use non-absorbent backing material (e.g. polyethylene backer rod) and appropriate joint width/depth. See technical data sheet for more information.
- Uncured sealant can be removed with mineral turpentine.
Safety tips
- Not suitable on polyethylene, polypropylene or Teflon.
- Cure excess product before disposal.
- Avoid skin and eye contact and inhalation of vapour. If in eyes, wash out immediately with water. If skin contact occurs, wipe off immediately and wash with running water.
- Ensure use in a well ventilated area.
- Additional information is provided in the Safety Data Sheet.
- 24 Hour Emergency Response : AUS 1800 033 111 NZ 0800 734 607
- Keep away from children.
Storage and re-use
- Product has a 12 months shelf life when stored unopened, in dry and cool conditions. Use within 6 months after opening.
Related Products
Selleys Silicone Remover
Selleys Silicone Remover takes the elbow grease out of removing old and unwanted silicone.
Selleys Light Speed Caulking Gun
An easy to use, light-weight yet high strength caulking gun providing total comfort and control.



