Ready to use

Selleys Spakfilla Rapid

Spakfilla Rapid new Group shot

Selleys Spakfilla Rapid is a ready-mixed, lightweight, quick setting filler designed for both interior and exterior use. Product is white in colour and easily sanded.


  • Fills cracks and holes in a single application
  • Non-cracking
  • Moisture and mould resistant
  • Pre-mixed so easy to use
  • Virtually non-shrinking
  • Only one application needed
  • Minimal sanding required
  • Very fast drying allowing sanding and painting in a short time period
  • Comes complete with a filling spatula for ease of use
  • Is water based, so can be cleaned up with water
  • Is available in a range of sizes and delivery styles
  • Paintable with oil and water based paints

Available Sizes

  • 180g tub
  • 260g tub

Available at

  • Big W
  • Bunnings
  • Home Hardware
  • K-Mart
  • Mitre 10
  • Thrifty Link
  • Woolworths
  • Dulux
  • Inspirations Paint & Colour
  • Paint Specialist stores

Where can this product be used?

  • Filling cracks and holes on surfaces where no structural movement occurs
  • Filling cracks in walls, ceilings, doors, windows
  • Repairing holes in walls, ceilings, doors and windows
  • Suitable for interior and exterior use
  • Nailing this product is not recommended
  • Not recommended for use on plastic or metal surfaces
  • Product is not flexible so is not suitable for use between surfaces that are subject the structural movement

What materials is this product suitable for?

  • Plaster
  • Wallboard
  • Wood
  • Plasterboard

How to use this product

  • Ensure surfaces are clean, dry and free of loose material.
  • Using the flexible spatula provided on the lid, press the filler firmly into crack/hole and smooth off surface.
  • Spakfilla Rapid has minimal shrinkage so there is no need to overfill.
  • Spakfilla Rapid can be sanded and painted with water-based paints once completely set (approximately 30 minutes in thin applications).
  • For applications more than 2mm deep, or in cold or humid conditions, longer drying times may be required.
  • For oil-based paints allow 24 hours before painting.

Handy tips

  • Painting with oil-based paints is not recommended until 24 hours after filler has been applied
  • Water based paints may be used immediately after filler has set
  • If filler is found to have stiffened prior to use*, stir product. If still too dry add one teaspoon of water and stir again. *Material that has actually hardened should be discarded.
  • Application tools may be cleaned with water
  • Sand back to a smooth finish
  • Sanding Block as the foam sponge will follow the contours of the surface
  • Before painting, clean dust and filler particles using Selleys Sugar Soap or Selleys Super Kleen.

Safety tips

  • If in eyes, hold eyes open and rinse in water. Seek medical attention if irritation persists
  • For further detail on the safe use of this product, please refer to the Material Safety Data Sheet, which can be downloaded from this site.
  • Clean tools in water before Spakfilla Rapid sets.