Selleys Fireproof Cement

Features

• Resists intense heat
• Sets hard
• Water clean up

Available Sizes

• 700g Tub

Colours

• White

Appearance

• Thick white paste

Where can this product be used?

• Repairing bricks in fireplaces & chimneys
• Sealing flues in pot-belly stoves
• Sealing cracks in ironworks & bricks
• Fireproof cement is not an adhesive – it is a filling compound
• Not recommended for external use e.g. BBQ’s, incinerators etc
• Fireproof cement is not suitable for use in kilns
• Fireproof Cement is not recommended for moving joints such as expansion joints as it sets rigidly
• Hardened material cannot be resoftened with water.

What materials is this product suitable for?

• Brick
• Metal
• Concrete

How to use this product

• Remove all dust, grease and loose debris before applying material.
• Dampen the cavities on porous surfaces for better adhesion.
• Apply Fireproof Cement firmly into holes and cracks with a damp knife or spatula.
• Allow Fireproof Cement to dry a minimum of 48 hours before exposure to heat.
• If Fireproof Cement is stiff slacken with a little water.

Handy tips

• Keep container closed tightly when not in use
• If Fireproof Cement is stiff slacken with a little water
• Dampen the cavities on porous surfaces for better adhesion

Safety tips

• Non Hazardous

Storage and re-use

• Trim off any excess before cure. Clean away any residues with a damp rag before product cures
• Once cured, material is difficult to remove. Chisel or sand any excess
• Store in a cool place with lid tightly sealed