Quick and Easy Adhesives

Selleys All Fix Multi Grip

Selleys All Fix Small Jobs
Gives great strength as well as flexibility and heat resistance.

Features

  • Multipurpose
  • Dries Clear for a seamless bond
  • Strong
  • Flexible
  • Safe to use indoors and outside
  • Solvent based adhesive

Available Sizes

  • 30g Tube

Colour

  • Clear

Available at

  • Bunnings
  • Mitre 10
  • Thrifty Link
  • Home Hardware
  • Coles
  • Woolworths
  • IGA
  • Selected Paint Specialists
  • Lincraft
  • Clark Rubber

Contact the store to confirm stock availability, as some stores may have a limited range.

Where can this product be used?

  • Hobby projects
  • Repairs of household items
  • PVC pool liners

What materials is this product suitable for?

  • Wood
  • Metal
  • Glass
  • Ceramic
  • Brick
  • Concrete
  • Cork
  • Most plastics*

How to use this product

Use in a well ventilated areas.

  1. Ensure surfaces are clean and dry. Remove cap and carefully pierce foil seal with sharp object. Replace nozzle part of cap.
  2. Squeezing gently, apply an even coating of Selleys All Fix Muligrip to both surfaces to be joined. Press surfaces together and clamp or hold firmly for approximately 1-2 minutes or until adhesive grabs. Instant bonds can be achieved on contact by waiting approximately 1 minute before pressing parts together firmly.
  3. Allow approximately 10-12 hours drying to achieve strength sufficient for normal use. Maximum bond strength is achieved after 24 hours or longer if large areas or nonporous materials (e.g. PVC) are being bonded.
  4. After application, clean nozzle and replace cap. Any spills can be removed with acetone (found in some nail polish removers).

Clean Up

  • Uncured product may be removed with water
  • Cured product can be removed by scraping

Handy tips

  • For very porous surfaces – apply a thin coat to both surfaces and allow to dry (approximately 5 minutes). Apply another layer as per normal directions.

Limitations

  • *Not suitable for polyethylene and polypropylene – use Selleys All Plastic Fix
  • Not suitable for polystyrene foam – use All Fix Big Jobs
  • Not for bonding requiring heat resistance above 90°C – use Quick Fix Ultra Repair

Safety tips

  • Do not swallow
  • Avoid contact with skin and eyes and breathing vapour
  • Remove from skin with soap and water
  • If in eyes, hold eyes open, flush with plenty of water for 15 minutes and seek medical attention
  • Highly flammable, keep away from sources of ignition
  • For advice, contact a Poisons Information Centre (AUS 131126; NZ 0800 764766) or a doctor
  • For further detail on the safe use of this product, please refer to the Material Safety Data Sheet, which can be downloaded from this site

Storage and re-use

  • Leave nozzle on tightly if storing once opened