Quick and Easy Adhesives

Selleys All Plastic Fix


Easy to use, fast setting adhesive system to repair ALL plastics.


  • Bonds ALL Plastics, including Polyethylene (PE) and Polypropylene (PP)
  • Easy to Apply
  • Dries clear for clean, neat results
  • Fast Bond: 2-30 seconds
  • No clamping necessary
  • No mixing required
  • self piercing, clog free cap on adhesive
  • Also bonds plastic to other surfaces: Metal, timber, china, rubber, leather

Available Size

  • Pen & 3mL Tube


  • Clear liquid dries to colourless film.

Available at

  • Woolworths
  • Coles
  • Mitre 10
  • Home Hardware
  • Thrifty Link Hardware
  • Kmart
  • Big W
  • Selected Auto Retail Outlets

Contact the store to confirm stock availability, as some stores may have a limited range.

Where can this product be used?

  • For interior projects and repairs
  • For fast & easy repair of household items made from plastic
  • Repair Toys & Games
  • Fix Car accessories
  • Repair Kitchen plastics and utensils
  • Repair Office items
  • Water resistant not water proof, therefore not suitable for surfaces that will be continually wet
  • Best results for Nylon items (e.g. car parts) are achieved without initial priming. Contact Selleys consumer advice if unsure of plastic type.
  • Not suitable for use on glass – we recommend Selleys Araldite Ultra Clear.

What materials is this product suitable for?

  • ALL Plastics

Adhering Plastic to

  • Metals
  • China
  • Rubber
  • Leather

How to use this product

  1. Ensure the surfaces to be joined are close fitting, clean, dry and free of dust.
  2. Using the primer pen, liberally coat plastic surface/s that are to be bonded.
  3. Pierce seal at end of adhesive tube by attaching nozzle and cap and turning clockwise.
  4. Remove cap and apply a very small amount of glue to one surface only. Bring surfaces together and apply slight pressure.
  5. The adhesive will grab within 2-30 seconds, depending on environmental conditions and materials being bonded.
  6. Allow at least 30 minutes for sufficient bond strength for practical use.
  7. Wipe tip of tube, replace cap and store upright in a dry cool place.

Handy tips

  • If using on leather test on an inconspicuous area first as adhesive may cause leather to discolour or harden.
  • Not suitable to repair items that will contain hot liquids.
  • Best results for nylon items are achieved without Initial priming (e.g car parts). Contact Selleys Consumer Advice if unsure of plastic type.
  • Will also bond plastic to non-plastic surfaces (Metals, Timber, China, Rubber, Leather). Do not use primer on non-plastic surfaces.
  • After use, wipe excess product from the adhesive nozzle with a tissue dipped in nail polish remover.
  • For best performance from this product after opening, store in the refrigerator or in a cool, dry place away from direct sunlight.
  • In the event that fingers get stuck together – don’t panic! Slowly twist fingers in opposite direction in hot soapy water.
  • Do not squeeze tube before removing cap. Handle tube by plastic nozzle neck when opening and closing cap. This prevents pressurizing tube which may force material into cap, preventing a tight seal after use.

Safety tips

  • Keep Out of reach of Children
  • Avoid contact with skin and eyes and avoid breathing in vapour.
  • Bonds on contact. Should fingers stick together apply a solvent such as acetone (nail polish remover) to contact areas then wash with water.
  • Do not use solvents near eyes or open wounds.
  • Highly Flammable, keep away from sources of ignition.
  • Contents of pen may cause lung damage if swallowed.
  • This product is hazardous according to the criteria of NOHSC and HSNO. For frequent hobby or occupational use, please refer to the Material Safety Data Sheet.
  • For Advice, contact a Poisons Information Centre (phone Aust. 131 126, NZ 0800 764 766) or a doctor.
  • In case of eye contact immediately flush with water for at least 15 minutes and seek medical attention.

Storage and re-use

  • Ensure caps are replaced and store in a cool dry place.

Related Products


Selleys Araldite Ultra Clear

A strong and durable, fast setting two part epoxy adhesive that dries crystal clear making it ideal for areas where an invisible bond is required. Mixed product gels in 5 minutes. Initial bonding...