Selleys Craft Glue
Selleys Craft Glue is a water based PVA adhesive specially formulated for quick adhesion for craft work. The product is an off-white paste which is clear when dry.
Features
- Easy to use – no mixing ready to use straight from the pack and only need to apply to one surface
- Fast Drying – initial bond can usually be achieved in a few seconds
- Dries clear
- Spills don’t stain and it’s easy to clean up with a wet rag
- Non-toxic – low odour and environmentally friendly
- Contains no flammable solvents
- Solvent free – no fumes and non-flammable
Available Sizes
- 100mL Bottle
Appearance
- White milky liquid that dries clear
Where to Buy
- Lincraft
- Kmart
- Coles
- Mitre 10
- Bunnings
- Thrifty Link
- Home Hardware
Where can this product be used?
- Re-attach book cover/spine or repair torn bindings
- Craft/hobby work
- On very porous or open weave fabrics extra adhesive may be required for optimum bond strength
- Craft glue has limited water resistance
- In very cold or damp conditions the adhesive is slower setting
What materials is this product suitable for?
- Fabrics
- Felt
- Cardboard
- Leather
- Suede
- Wood
- Paper
- Most plastic films (other than polyethylene and polypropylene)
- Sequins
How to use this product
- Ensure surfaces to be joined are clean, dust and lint free.
- Shake bottle well before use. Unscrew cap to expose nozzle.
- Apply a thin coat of Selleys Craft Glue to one surface and press together.
- Hold in position with light pressure for a few seconds, or longer for very absorbent surfaces.
- Clean up excess glue quickly with a damp cloth. Wipe nozzle clean and replace cap after use.
Handy tips
- On very porous surfaces applying a thin layer to each side and allowing it to soak in before applying a second layer to one side only may result in a stronger bond.
- Glue can be resoftened by soaking item in warm water or by application of acetone.
- Keep a box of Selleys Sugar Soap Wipes around for quick & effective clean up.
Safety tips
- Avoid eye contact, if contact occurs flush with plenty of water for 15 minutes and seek medical advice.
Storage and re-use
- Clean up excess glue quickly with a damp cloth. Wipe nozzle clean and replace cap after use.



